Next: Control functions
Up: Program Design
Previous: Program Design
The main program, named MARS, provides the glue to fit
together the registration subtasks described above. The program is
started by isuing 'mars' on the Matlab 6 command
prompt. The main program then starts, reads in setup information from
the script
matlab/mars/PVEOutSetup.m,
which should be customised to match the local setup1
Next, the main
program interface appears (Figure 3.1)
Figure 1:
The main program interface of MARS
|
|
The interface is used for
- Selection of Standard File / Reslice File(s), what image(s)
should be registered to which image?
- Selection of the registration method to use. (More on this topic below)
- Selection of 'inspection' module. Visually inspecting
registration output is important for catching possible
registration problems.
- Reading/Saving coregistration mathematics (up to 12 parameter affine)
- Reslicing of the image(s).
Subsections
Claus Svarer
2006-01-11
![\includegraphics[width=0.6\textwidth]{images/main.ps}](../images/main.png)